Scholl Concepts C-Rock Permanent Ceramic Coating Kit

£99.95 (£83.29 exc. VAT)

Low in Stock

Description

Scholl Concepts C-Rock Permanent Ceramic Coating Kit

Protect your vehicle from weathering caused by UV radiation, corrosion, and dirt of any kind. C-ROCK Permanent Ceramic Coating offers protection against environmental influences lasting up to 50,000 km and sustainably reduces dirt build-up. An enormously long-lasting protection with a hardness rating of 9H and an excellent beading effect (hydrophobic) together with the Easy Clean formula are guaranteed to win you over.

Kit Includes:

  • C-ROCK Permanent Ceramic Coating 30 ml (1x)
  • Foam Applicator Ø 80mm (1x)
  • Ceramic Microfiber Cloth 20×20 cm (5x)
  • Manual

Application:

After completing polishing work, the surface should always be checked for paint defects (scratches). Otherwise, these will be encased or enclosed by the sealant and will be difficult to remove afterwards. Once the surface is ready, use PREPARATOR Sealing PrePare to pre-clean all the vehicle surfaces on which the C-ROCK Permanent Ceramic Coating is to be applied. To be on the safe side, this process can be repeated once. All oils, greases, adhesive residues, silicones, and waxes must be removed!

The first step is to wrap the microfiber cloth around the application sponge. Position the applicator centrally on the SCHOLL Concepts logo on the microfiber cloth and fix all four ends of the cloth in the foam notch.

The bottle of C-ROCK Permanent Ceramic Coating must be shaken well before each use. Apply 5-10 drops to the large, microfiber-coated side of the applicator.

Then use the applicator to apply the liquid evenly on the paint surface in a criss-cross pattern. No area should be omitted and a homogeneous film should be formed. The crosswise movement itself should not exceed an application area of more than 60×60 cm.

After application, the C-ROCK Permanent Ceramic Coating needs a short treatment time of about 3 – 5 minutes. For colder environments or surface temperatures, we usually recommend a longer treatment time of up to 5 – 6 minutes.

Once the treatment time is over, the residues are removed with the help of a microfiber cloth (lint-free), such as our MicroPLUS polishing cloth 40×40 cm red. Once all liquid residues have been removed, the application step is complete.

After the application and subsequent removal of the liquid residues, the drying phase begins. During this phase, you should not move your vehicle. Let it rest for 24 hours. The most important hours are the first 9. Within this time frame, your vehicle should not be exposed to any weather. A wind-protected and roofed parking place would be advantageous. After 9 hours, the most sensitive phase is over. Nevertheless, you should wait 24 hours before moving your vehicle in order to achieve a weather-resistant degree of hardness. You can start with the first wash of your vehicle after 7 days.

Additional information

Weight2001.00 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Free Delivery on orders over £75
UK Mainland Only (Subject to T&C)